Product Introduction

AFT-BG-36IP3 is a cost-effective SIP intercom product developed specifically for industry user needs. It has an exquisite appearance, powerful functions, and integrates intelligent security, audio intercom, and broadcasting functions, with high cost-effectiveness. Supports wall mounted installation, suitable for indoor and outdoor scenarios, and can provide users with high-quality communication and intercom services.









Product Features

Aluminum alloy shell, with fine wire drawing treatment on the surface, has the characteristics of waterproof, dustproof, moisture-proof, corrosion-resistant, and anti violent impact.
The emergency button is a self resetting illuminated button produced by the most professional manufacturer in China. It is made of 304 stainless steel material and has the characteristics of waterproof, moisture-proof, dustproof, etc.
The telephone motherboard is developed using imported microcontrollers and chips ground by the company. All components are made using SMT surface mount technology, which has rich functions and high integration. Two dry node interfaces, one on and one off, are reserved to enhance the linkage with external devices.
The overall protection level of the phone is IP54. If it needs to be installed outdoors, a rain cover must be added.
● 2-level sound volume adjustment mode, which can be adjusted according to needs.











Phone function

1. Automatic response: As a called person, the phone detects the called signal and can automatically connect. The ringing time can be set by oneself;
2. IP point-to-point calling: supports IP address calling, i.e. IP address point-to-point intercom;
3. Linkage function: This phone has reserved a dry node signal, which can be linked with external devices such as cameras;
4. LOGO customization: LOGO identification and operation instructions can be customized according to requirements;
5. Support customization of external dimensions and color customization.











Main parameters

尺寸图

安装示意

a. After unpacking, use a screwdriver to unscrew the bottom shell fixing screws;

b. According to the size of the bottom shell and the installation size of the panel, drill 4 holes in the wall and insert rubber plugs (if it is an elevator car, drill 4 M4 holes and tap)

c. Connect the network cable to the telephone motherboard through the bottom shell inlet hole;

d. Insert the bottom shell of the telephone into the wall and fix it with a screwdriver, then clip the panel onto the wheel of the bottom shell.